Skip to content

Administration management

Once you set up your environment you can start your work as an administrator. Your most useful tools can be found in Admin Panel.

System Information

The System Information panel in the Back Office is sourced in a ezsystems/ez-support-tools repository. There you will also find basic system information such as versions of all installed packages.


Sections are used to divide Content items in the tree into groups that are more easily manageable by content editors. Division into Sections allows you, among others, to set permissions for only a part of the tree.

Technically, a Section is a number, a name and an identifier. Content items are placed in Sections by being assigned the Section ID. One item can be in only one Section.

When a new Content item is created, its Section ID is set to the default Section (which is usually Standard). When the item is published it is assigned to the same Section as its parent. Because content must always be in a Section, unassigning happens by choosing a different Section to move it into. If a Content item has multiple Location assignments then it is always the Section ID of the item referenced by the parent of the main Location that will be used. In addition, if the main Location of a Content item with multiple Location assignments is changed then the Section ID of that item will be updated.

When content is moved to a different Location, the item itself and all of its subtree will be assigned to the Section of the new Location. Note that it works only for copy and move; assigning a new Section to a parent Content item does not affect the subtree, meaning that Subtree cannot currently be updated this way.

Sections can only be removed if no Content items are assigned to them. Even then, it should be done carefully. When a Section is deleted, it is only its definition itself that will be removed. Other references to the Section will remain and thus the system will most likely lose consistency.


Removing Sections may corrupt permission settings, template output and other things in the system.

Section ID numbers are not recycled. If a Section is removed, its ID number will not be reused when a new Section is created.

Sections screen


Users in eZ Platform are treated the same way as Content items. They are organized in groups such as Guests, Editors, Anonymous, which makes it easier to manage them and their permissions. All User Groups and Users can be accessed in the Admin panel by selecting Users.


Be careful not to delete an existing User account. If you do this, content created by this User will be broken and the application can face malfunction.

Registering users

Registration form for your website is placed under this address: /register. By default, new Users created in this way are placed in the Guest accounts group. To give your users a possibility to register themselves, follow the instructions on enabling account registration.


To give users an access to your website you need to assign them roles in the Admin panel. Each role consists of:


Rules that give users access to different function in a module. You can restrict what user can do with Limitations. The available Limitations depend on the chosen Policy. When Policy has more than one Limitation, all of them have to apply. See example below.


Limitation specifies what a User can do, not what they can't do. A Location Limitation, for example, gives the User access to content with a specific Location, not prohibits it. See Available Limitations for further information.


After you created all Policies, you can assign the Role to users and/or groups with possible additional Limitations. Every User or User Group can have multiple Roles. A User can also belong to many groups, for example, Administrators, Editors, Subscribers.

Best practice is to avoid assigning Roles to Users directly. Model your content (Content Types, Sections, Locations etc.) in a way that can be accessed by generic Roles. That way system will be more secure and easier to manage. This approach also improves performance. Role assignments and Policies are taken into account during search/load queries.

See Permissions overview for further information.

Policies examples

Here are a few examples of sets of Policies you can use to get some common permission configurations.

Enter back end interface

To allow the User to enter the Back Office interface and view all content, you need to set the following Policies:

  • user/login
  • content/read
  • content/versionread
  • section/view
  • content/reverserelatedlist

These Policies will be necessary for all other cases below that require access to the content structure.

Create content without publishing

This option can be used together with eZ Enterprise's content review options. Using the following Policies, the User is able to create content, but can't publish it; instead, they must send it for review to another User with proper permissions (for example, senior editor, proofreader, etc.).

  • content/create
  • content/edit

Note that without eZ Enterprise this setup should not be used, as it will not allow the User to continue working with their content.

Create and publish content

To create and publish content, the user must additionally have the following Policies:

  • content/create
  • content/edit
  • content/publish

This also lets the user copy and move content, as well as add new Locations to a Content item (but not remove them!).

Removing content

To send content to trash, the User needs to have the content/remove Policy.

To remove an archived version of content, the User must have the content/versionremove Policy.

Further manipulation of trash requires the content/restore Policy to restore items from trash, and content/cleantrash to completely delete all content from the trash.

Restrict editing to part of the tree

If you want to let the User create or edit content, but only in one part of the content tree, you need to use Limitations. Three Limitations that could be used here are Section Limitation, Location Limitation and Subtree of Location Limitation.

Section Limitation

Let's assume you have two Folders under your Home: Blog and Articles. You can let a User create content for the blogs, but not in Articles by adding a Section Limitation the Blog Content item. This will allow the User to publish content anywhere under this Location in the structure. Section does not have to belong to the same Subtree of Location in the content structure, any Locations can be assigned to it.

Location Limitation

If you add a Location Limitation and point to the same Location, the User will be able to publish content directly under the selected Location, but not anywhere deeper in its Subtree of Location.

Subtree of Location Limitation

If you want to limit User's access to a subtree you need to use the Subtree of Location Limitation. To do so, you need to create two new Roles for a User Group:

  1. Role with a Subtree Limitation for the User
  2. Role with a Location Limitation for the Subtree

Follow the example below to learn how to do that.

Cookbook, Dinner recipes and Dessert recipes containers are not accessible in the frontend, so you need to edit access to them in the Admin Panel.

Subtree file structure

To give the vegetarian editors access only to the Vegetarian dinner recipes section create a new Role e.g. EditorVeg. Next, add to it a content/read Policy with the Subtree Limitation for Cookbook/Dinner recipes/Vegetarian. Assign the Role to the vegetarian editors User Group. It will allow users from that group to access the Vegetarian container but not Cookbook and Dinner recipes.

To give users access to Cookbook and Dinner recipes containers you need to create a new Role e.g. EditorVegAccess. Next, add to it a content/read Policy with the Location Limitations Cookbook and Dinner recipes. Assign the new Role to the vegetarian editors User Group as well. Only then the limitations are combined with AND resulting in an empty set.

The vegetarian editors should now see the following Content Tree:

Limited subtree file structure

Note that when a Policy has more than one Limitation, all of them have to apply, or the Policy will not work. For example, a Location Limitation on Location 1/2 and Subtree of Location Limitation on 1/2/55 cannot work together, because no Location can satisfy both those requirements at the same time. If you want to combine more than one Limitation with the or relation, not and, you can split your Policy in two, each with one of these Limitations.


Editorial workflows

You can control which stages in an editorial workflow the user can work with.

Do this by adding the WorkflowStageLimitation to content Policies such as content/edit or content/publish.

You can also control which transitions the user can pass content through. Do this by using the workflow/change_stage Policy together with the WorkflowTransitionLimitation.

For example, to enable the user to edit only content in the "Design" stage and to pass it after creating design to the "Proofread stage", use following permissions:

  • content/edit with WorkflowStageLimitation set to "Design".
  • workflow/change_stage with WorkflowTransitionLimitation set to to_proofreading

For more examples, see Permissions use cases.


eZ Platform offers the ability to create multiple translations of your website. Which version is shown to a visitor depends on the way your installation is set up. A new language version for the website can be added in the Admin Panel in the Languages tab. Every new language must have a name and a language code, written in the xxx-XX format, for example eng-US etc.

The multilanguage system operates based on a global translation list that contains all languages available in the installation. After adding a language you may have to reload the application to be able to use it. Depending on your set up, additional configuration may be necessary for the new language to work properly, especially with SiteAccesses.

See Languages for further information.

Content Types

A Content Type is a base for new Content items. It defines what fields will be available in the Content item. For example, a new Content Type called Article can have fields such as title, author, body, image, etc. Based on this Content Type, you can create any number of Content items. Content Types are organized into groups. You can add your own groups here to keep your Content Types in better order.

For a full tutorial, see Create a Content Type or follow user documentation. For a detailed overview of the content model, see Content model overview.

Object States

Object states are user-defined states that can be assigned to Content items. They are contained in groups. If a state group contains any states, each Content item is automatically assigned a state from this group.

You can assign states to content in the Back Office in the Content item's Details tab.

Assigning an Object state to a Content item

By default, eZ Platform contains one Object state group: Lock, with states Locked and Not locked.

**Lock** Object state

Object states can be used in conjunction with permissions, in particular with the State Limitation. Their specific use cases depend on your needs and the setup of your permission system.