To provide recommendations, a tracking process needs to collect user behavior on the customer's site. The most popular user events are:
- Click - When a user opens a detail page.
- Buy/Consume - When a user buys an item or consumes content
- Rate - When a user likes, comments or rates an item
- Login - When a user logs in on a website
- Clickrecommended - When a user clicks a recommendation
For a complete list of events, see Event types in the user documentation. Depending on the event type, some additional parameters, such as item price or user rating, must be provided.
Importing historical user data can help you reduce the delay in delivery of high quality recommendations. For more information, see Importing historical user tracking data.
You can use the tracking API both in eCommerce and content publishing scenarios. eCommerce mostly uses the term "product", whereas the Publisher domain widely uses the terms "content", "article", "images" or "videos". Therefore, a generic term "item" is used instead to cover all the above types. For further segmentation the term "item type" is used, which, in combination with the item ID itself, defines a domain specific object.
For example, an electronic product could be defined by item type "1" and item id "3298", while a textile product could be defined by item type "2" and item id "3298".
Usually only one item type is sufficient in the eCommerce business as each product available in an eCommerce shop has a unique identifier.
|Domain||Item ID||Item Type|
|Content publishing||Article||ID of an article|
|Content publishing||Video||ID of a video|
|Content publishing||Photo Gallery||ID of a photo gallery|
Assuming the numbering of content is independent and the same item ID is used for two items of different item types, it is impossible to tell the difference if there is no segmentation by item types.
If an article, a video and a photo gallery have the same item ID, use different item types to separate the items that are tracked. For example:
- item type "1" and itemid "29712" -> article
- item type "2" and itemid "29712" -> video
- item type "3" and itemid "29712" -> photo gallery
Even if item IDs cannot overlap in a customer's system, Ibexa recommends using different item types to provide independent tracking and cross-item type recommendations, such as, for example, "Users who read this article also watched these videos" or "Users who liked this gallery also read these articles".
High quality recommendations can only be delivered if the underlying data is correct and consistent. For consistent tracking it is crucial to choose and use a consistent identifier for a user. A user usually visits a website anonymously. Therefore, their identifier is either a first-party cookie or a session ID provided by the website. If there is no existing user ID handling that we can re-use, it is recommended that you use your own cookie and set the expiry date to at least 90 days from the last usage. If there is a login mechanism, the user is usually tracked with a temporary identifier before the login. Immediately after a successful login process a Login event must be sent. At this point a pseudonymous user ID, for example, a system's internal registration id, must be used. After logout, the anonymous user ID can be used again.
The user identifier is required in tracking requests, otherwise it is discarded from the tracking servers.
The Personalization server internally creates a hash of every user ID. The original ID is not saved. It is still possible that the original ID appears in the log files for the debugging purposes but log files are purged regularly. The user ID is case sensitive.
Persons responsible for the sales policy in place in your organization must decide what should be presented as recommendations on the website. In the eCommerce business you mostly have the possibility to track items based on:
- Stock Keeping Unit (SKU) or
- Universal Product Code (UPC)
The exact identifiers that are tracked are also recommended ("what-you-track-is-what-you-get"). By default, it is not possible to track SKUs but recommend UPCs. The following use case is typical for eCommerce business:
Customer A implements the Personalization server and decides to use the SKU as item identifiers and recommendable items. End users who browse through the shop probably get recommendations of the same item that is currently displayed but in a different size and/or color, a so-called "variant". The Personalization server does not recognize relations between items, therefore, every single SKU is used to calculate similarities between them. In the case of bestsellers, this could lead to the appearance of a shirt in size L on position 2 and the same shirt in size M on position 4.
Customer B decides to use the UPC as item identifiers. This results in recommendations that do not contain variations of the currently shown item. Therefore, the detail page of shirt X does not contain a recommendation for the same shirt in a different size. And the same shirt does not show up twice on a list of bestseller recommendations.
If the size of an item or the color is selectable on a detail page of an item, you may prefer to use the UPC. If recommendations of the same item in different sizes or colors are desired, you should use the SKU as item identifiers.
Remember to use the same identifier in all interactions between your website and the Personalization server, for example, when a user buys an item, clicks a recommendation or displays a product page.
Request parameter categorypath¶
Category paths are logical tree structures that lead to items and are used for recommendation filtering. For example, "recommend only items from the same category".
During recommendation requests, the category path must always be provided.
The category path is a forward slash-separated list of categories from the root, for example,
The initial slash (if present) is ignored.
Like all other parameters, the category path must be URL-encoded and cannot contain backslashes.
The "categorypath" parameter offers the possibility to provide category-based recommendations without an explicit export of the structure of a customer's website. If enabled by Ibexa, it is used for on-the-fly updating of item categories. If an item is moved to another category, it is handled as present in both categories until the old category ages out or is forcibly deleted. Multiple category locations of an item (multi-homing) are therefore possible.
When you import your own item metadata by using the Personalization server import interface, you might choose to not provide the category path in the Click event. Category path is required by default, contact Ibexa to change the default configuration.
Events are forwarded to the Personalization server with HTTP or HTTPS requests (or RESTful-Requests. Both GET and POST methods are allowed for the event tracking. Make sure that all embedded and query string parameters are URL encoded and do not use a backslash [encoded as %5C].
When the end user opens an item/article detail, a Click events is sent. The Click event often provides additional information about the category structure of the website.
User IDs are not stored in the database. They are irreversibly anonymized before saving to disk or building the recommendation model.
The URL to track user clicks has the following format:
||A customer ID (for example "00000"). Can be used to identify a website in installations that hosts multiple SiteAccesses.||alphanumeric|
|userid||A user's ID on the website of the customer. It could be an internal customer code, a session code or a cookie for anonymous users.||URL-encoded alphanumeric|
||Item type ID.||1 to 2147483647|
||A unique ID of the item the user has clicked.String-based identifiers are also supported as item IDs to track content on a website, but it is discouraged due to fraud and security issues. If you are unable to provide numeric identifiers for the tracking process, contact Ibexa for further information and implementation notes.||1 to 2147483647|
All embedded parameters are required for the request. Some optional request parameters can be set over query string parameters (GET parameters).
||The forward slash-separated path of categories of the item. Like all other parameters it must be URL-encoded, for example
||URL-encoded string.Initial and trailing slashes are ignored: "/Cameras/" is the same as "Cameras".|
eCommerce vs. content publishing
The Consume event is important for content publishing websites. For eCommerce stores, this event is not required but can be used in custom implementations.
The event is sent when the end user stays on the page for a predefined period of time. It is then assumed that the user consumed the item (read an article or watched a video).
The URL has the following format:
All embedded parameters are the same as for a Click event. The following table lists the request parameters:
||Informs how much of an item was consumed, for example, that an article was read only in 20%, a movie was watched in 90% or someone finished ¾ of all levels of a game.||0-100|
The logic for calculating the percentage is defined by the implementation. For articles, this could be by scrolling down, for a movie/video based on the consumption part. You must decide what 100% consumption means. For example, a movie contains end titles that are almost never consumed. Therefore, they should not be part of the percentage calculation.
Incremental tracking of consume events
Consume events for a user can be sent incrementally as the recommender uses only the highest percentage rate. For example, if a user watches a movie, the website could send Consume events in 10% steps to avoid losing tracking information when the browser window is forcibly closed.
As the name suggests, this event is used when an end user buys an item. It must be sent to the event tracker at the end of a successful check-out process to ensure that no further action of the user can result in an abort.
The URL has the following format:
In addition to the fact that an item is bought, this event should provide information about the product price and quantity.
||The number of products a user has bought. Default value is "1". You can send n events instead of setting this parameter to n. This parameter is optional.||integer (default is "1")|
||A price for a single product. It contains the price in decimal format plus the currency ISO 4217 code. If the price has a decimal part, the point must be used. There can be no space between price and currency. This parameter is optional.||currency, for example "12.45EUR" or "456JPY"|
For example, if a user bought 4 pens for 10 Euros,
fullprice can be set to "2.50EUR"
quantity can be set to 4.
The Buy event is only relevant if the user is charged per product, like in a classic shop. If products are sold on a subscription basis, or the web presence is ad-sponsored, this event type is not applicable.
Prices in a Buy event¶
Every Buy event can contain a price. If the price is set, it is stored with the event and used for calculating the revenue for statistics. The price must be a price the user paid for the item, including all taxes and discounts.
If product price filtering is activated, the information provided over the product import is used. For more information, see Content API.
The currency is stored with the price and normalized only when statistic information is requested. It is often a good choice to select a base currency and convert prices before sending the buy event. The price attached to a buy event never overwrites the price which was defined in an item import.
Recommendations rely on the fact that user actions can be correlated over a longer period of time. Moreover, recommendations similar to "users who viewed this product ultimately bought it" require correlating Click events with subsequent Buy events. In general, users tend to browse a website anonymously and add products to their shopping cart. Up to this point, a user is identified by a visit-scoped variable (for example, a session ID or a first party cookie). During the check-out of the shopping cart, a user probably logs in to an existing account. As a result, the user identifier changes from an anonymous visit-scoped ID (sourceuserid) to a pseudonymous, persistent account ID (targetuserid). You should correlate both IDs to correlate the Buy events (account ID) with the preceding Click events (visit-scoped ID). The Login event serves exactly this purpose.
The format of the URL is:
|sourceuserid||User identifier valid up to now(usually some anonymous session ID)||URL-encoded alphanumeric|
|targetuserid||User identifier valid from now on (usually an account ID or login name)||URL-encoded alphanumeric|
The Basket event can be used to add products to a user's shopping cart. This event is especially useful if anonymized checkout is allowed or no recurring user identification is possible. By using the shopping cart products as input for getting recommendations, problems with an empty profile or no buy history for the user can be solved. The more valuable Basket events instead of recent user clicks can be used to provide personalized recommendations. It also happens quite often that users "store" products on their shopping wishlist and plan to buy them later. With the help of this information, personalized shopping cart-based recommendations can be provided in the whole shop.
There are no query string parameters for this event.
Publishers, media or shops often allow commenting/rating products, articles or movies. If a user comments on an item, it indicates a special interest in this topic that has to be treated separately.
The format of the URL is:
This can also be used for explicit ratings like a five-star rating for hotels. A predefined rating can be submitted when the user comments on an item.
||The rating a user gives an item. The rating value is normalized during the calculation of rate-based recommendations. Therefore, there is no need to use the full scale of 0-100 but it needs to be consistent.||integer from 0 to 100|
If a website offers a link or button that allows feedback similar to "do not recommend this product to me anymore", a user could express that they have bought it already in another shop.
The format of the URL is:
There are no query string parameters for this event.
Tracking events based on recommendations¶
Tracking events based on integrated recommendations are the only way to measure success of recommendations. It is crucial to inform the Personalization server about which recommendations were shown and what recommendations were clicked. Otherwise, reliable statistics cannot be calculated and used to check against the customer's KPIs.
A recommendation response already includes the requests to generate a Clickrecommended or Rendered event. They are used and executed when a recommendation is clicked/accepted or a recommendation is shown. Sending Rendered events causes as many requests as recommendations to be displayed, a Clickrecommended event is usually sent only once (when a user clicks on a specific recommendation item).
Example of a recommendation response:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
links field, the delivered request string is visible, which is executed
when the end user displays or clicks a recommendations.
See Recommendation API for more details.
You can still implement the traditional way as mentioned below but it is strongly recommended against this. If you do so, remember to examine it together with the Ibexa team because it is crucial for statistical analysis.
When the end users clicks a recommendation, the following event is sent to gather statistics related to the acceptance of recommendations.
The URL has the following format:
The embedded parameters are the same as for a Click event.
The request parameters are:
||Name of the scenario, where recommendations originated from. This parameter is required.||URL-encoded alphanumeric|
The scenario parameter identifies the originating scenario to gain detailed statistics about the scenario that motivated the user to click on a recommendation. This information comes with the recommendation from the recommendation controller.
The event is used for providing statistics about how often recommendations of the configured recommendation scenario were accepted or considered as useful by users.
This event sent when the website uses the recommendation provided by the recommendation engine and renders it on the webpage. In combination with a predefined threshold, it allows the recommender engine to exclude this item from future results and avoid recommending the same item to the same user multiple times during a session.
The URL for a Rendered event has the following format:
The Rendered event has the same embedded parameters as the Click event, except for the item ID. It is common that recommendations are rendered as a block with multiple items. To save traffic and reduce latency, you can bundle multiple recommendations in one request. Several item IDs must be comma-separated.
Tracking event examples¶
Below are examples for the translation of user actions on a website into tracking requests.
User "Js79009234YU7" navigates to an item 123 of type 1, located under
Products 128, 129 and 155 of type 1 are rendered as recommendations for user "Js79009234YU7". Recommendations were delivered by the scenario "also_bought":
User clicks a recommended product 155 that was delivered by the scenario "also_bought":
User "Js79009234YU7" has watched a video 452 (all videos are item type "3"):
User "Js79009234YU7" has watched 60 percent of a video 466:
User "Js79009234YU7" puts products 128 and 129 into the shopping basket.
To buy selected products, user "Js79009234YU7" logs in and obtains an internal identifier (for example, the registration ID) "johndoe" from the site.
The user buys two products from the shopping basket: product 128 (one piece for the price of EUR 19.99) and product 129 (2 pieces for the price of EUR 4.44 each).
User "johndoe" likes the product 133 and wants to rate it with 5 stars.
The following HTTP response codes are used by the event tracker.
|HTTP Status Code||Description|
|200 OK204 No Content||Request was successfully processed.|
|400 Bad Request414 Request-URI Too Long||The request is wrongly formatted. See response body for more information.|
|401 Unauthorized||Invalid authentication credentials.|
|403 Forbidden||Access denied (not implemented yet).|
|404 Not Found||The customer ID was not found. The event code was not found.|
|500 Internal Server Error||Unspecified error. Contact Ibexa if this error reoccurs frequently.|
In case of errors, the body of the response contains human-readable error messages. Human-readable error messages can be changed and should not be used for automated processing.