Skip to content
  • Documentation >
  • Guide >
  • Cache >
  • HTTP cache >
  • Reverse proxy

Reverse proxy

Using Symfony reverse proxy

To use the Symfony reverse proxy, you must change your public/index.php front controller script and wrap Ibexa\Bundle\HttpCache\AppCache instead of Symfony\Bundle\FrameworkBundle\HttpCache\HttpCache around the kernel.

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
--- a/public/index.php
+++ b/public/index.php
@@ -1,9 +1,11 @@
 <?php

 use App\Kernel;
+use EzSystems\PlatformHttpCacheBundle\AppCache;

 require_once dirname(__DIR__).'/vendor/autoload_runtime.php';

 return function (array $context) {
-    return new Kernel($context['APP_ENV'], (bool) $context['APP_DEBUG']);
+    return new AppCache(new Kernel($context['APP_ENV'], (bool) $context['APP_DEBUG']));
 };

Caution

Don't enable the Symfony reverse proxy in public/index.php if you intend to use Varnish or Fastly. You may only use one HTTP cache at a time.

Using Varnish or Fastly

As Ibexa DXP is built on top of Symfony, it uses standard HTTP cache headers. By default, the Symfony reverse proxy is used to handle cache. You can replace it with other reverse proxies, such as Varnish, or CDN like Fastly.

Using a different proxy is highly recommended as they provide better performance and more advanced features such as grace handling, configurable logic through VCL and much more.

Note

Use of Varnish or Fastly is a requirement for a Clustering setup, as Symfony Proxy does not support sharing cache between several application servers.

VCL base files

For reverse proxies to work properly with your installation, you need to add the corresponding VCL files for your HTTP Cache.

  • Varnish VCL xkey example
  • Fastly VCLs can be found in vendor/ezsystems/ezplatform-http-cache-fastly/fastly. You must install the following to use Fastly:
    • ez_main.vcl as the main custom VCL
    • ez_user_hash.vcl as another custom VCL
    • snippet_re_enable_shielding.vcl as snippet

The provided .vcl files will work both with Fastly Shielding enabled and without it.

For more information on how to configure Fastly with Ibexa DXP, see Configure and customize Fastly.

Tip

Support for Fastly Shielding was added in Ibexa DXP v3.3.24 and v4.1.6.

When you extend FOSHttpCacheBundle, you can also adapt your VCL further with FOSHttpCache documentation to use additional features.

Configure Varnish and Fastly

The configuration of Ibexa DXP for using Varnish or Fastly requires a few steps, starting with configuring proxy.

Failing to configure reverse proxies correctly may introduce several problems, including, but not limited to:

  • Ibexa DXP generating links with a wrong protocol schema (HTTP instead of HTTPS) if HTTPS termination is done before the web server due to the X-Forward-Proto headers being ignored
  • Ibexa DXP generating links with wrong port numbers due to the X-Forward-Port headers being ignored
  • Back Office showing the login screen because JWT tokens are not accepted due to the X-Forward-For headers being ignored

Configure Symfony front controller

You need to consider your TrustedProxy configuration when you use Symfony behind a load balancer or a reverse proxy.

Set the following environment variable: - TRUSTED_PROXIES: String with trusted IP, multiple proxies can be configured with a comma, for example, TRUSTED_PROXIES="192.0.0.1,10.0.0.0/8"

Add the trusted proxies to your configuration file:

1
2
framework:
    trusted_proxies: '%env(TRUSTED_PROXIES)%'

Careful when trusting dynamic IP using REMOTE_ADDR value or similar

On Platform.sh, Varnish does not have a static IP, like with AWS LB. For this reason, the TRUSTED_PROXIES env variable supports being set to value REMOTE_ADDR, which is equal to:

1
Request::setTrustedProxies([$request->server->get('REMOTE_ADDR')], Request::HEADER_X_FORWARDED_ALL);

When trusting remote IP like this, make sure your application is only accessible through Varnish. If it is accessible in other ways, this may result in trusting, for example, the IP of client browser instead, which would be a serious security issue.

Make sure that all traffic always comes from the trusted proxy/load balancer, and that there is no other way to configure it.

When using Fastly, you need to set trusted_proxies according to the IP ranges used by Fastly.

Tip

You don't have to set trusted_proxies when using Fastly on Platform.sh. The Platform.sh router automatically changes the source IP of requests coming from Fastly, replacing the source IP with the actual client IP and removing any X-FORWARD-... header in the request before it reaches Ibexa DXP.

For more information about setting these variables, see Configuration examples.

Update YML configuration

Next, you need to tell Ibexa DXP to use an HTTP-based purge client (specifically the FosHttpCache Varnish purge client), and specify the URL that Varnish can be reached on (in config/packages/ezplatform.yaml):

Configuration Parameter Environment variable Possible values
ezplatform.http_cache.purge_type purge_type HTTPCACHE_PURGE_TYPE local, varnish, fastly
ezplatform.system.<scope>.http_cache.purge_servers purge_server HTTPCACHE_PURGE_SERVER Array of URLs to proxies when using Varnish or Fastly (https://api.fastly.com).
ezplatform.system.<scope>.http_cache.varnish_invalidate_token varnish_invalidate_token HTTPCACHE_VARNISH_INVALIDATE_TOKEN (Optional) For token-based authentication.
ezplatform.system.<scope>.http_cache.fastly.service_id fastly_service_id FASTLY_SERVICE_ID Service ID to authenticate with Fastly.
ezplatform.system.<scope>.http_cache.fastly.key fastly_key FASTLY_KEY Service key/token to authenticate with Fastly.

If you need to set multiple purge servers, configure them in the YAML configuration, instead of parameter or environment variable, as they only take single string value.

Example configuration for Varnish as reverse proxy, providing that front controller has been configured:

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
ezplatform:
    http_cache:
        purge_type: varnish

    system:
        # Assuming that my_siteaccess_group contains both your front-end and back-end SiteAccesses
        my_siteaccess_group:
            http_cache:
                # Fill in your Varnish server(s) address(es).
                purge_servers: [http://my.varnish.server:8081]

Invalidating Varnish cache using tokens

In setups where the Varnish server IP can change (for example, on Ibexa Cloud), you can use token-based cache invalidation through ez_purge_acl.

In such situation, use strong, secure hash and make sure to keep the token secret.

Ensure proper Captcha behavior

If your installation uses Varnish and you want users to be able to configure and use Captcha in their forms, you must enable sending Captcha data as a response to an Ajax request. Otherwise, Varnish does not allow for the transfer of Captcha data to the form, and as a result, users see an empty image.

To enable sending Captcha over Ajax, add the following configuration to config/packages/ezplatform.yaml:

1
2
3
4
5
6
ezplatform:
    system:
        default:
            form_builder:
                captcha:
                    use_ajax: true

Update custom Captcha block

If you created a custom Captcha block for your site by overriding the default file (vendor/gregwar/captcha-bundle/Resources/views/captcha.html.twig), you must make the following changes to the custom block template file:

  • change the name of the block to ajax_captcha_widget
  • include the JavaScript file:
1
{{ encore_entry_script_tags('ezplatform-form-builder-ajax-captcha-js', null, 'ezplatform') }}
  • add a data attribute with a fieldId value:
1
data-field-id="{{ field.id }}"

As a result, your file should be similar to this example.

For more information about configuring Captcha fields, see Captcha field.

Use Fastly as HttpCache proxy

Fastly delivers Varnish as a CDN service and is supported with Ibexa DXP. To learn how it works, see Fastly documentation.

Configure Fastly in YML

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
ezplatform:
    http_cache:
        purge_type: fastly

    system:
        # Assuming that my_siteaccess_group contains both your front-end and back-end SiteAccesses
        my_siteaccess_group:
            http_cache:
                purge_servers: [https://api.fastly.com]
                fastly:
                    # See below for obtaining these values
                    service_id: "ID"
                    key: "token"

Configure Fastly using environment variables

See the example below to configure Fastly with the .env file:

1
2
3
4
5
6
7
HTTPCACHE_PURGE_TYPE="fastly"
# Optional
HTTPCACHE_PURGE_SERVER="https://api.fastly.com"

# See below for obtaining service ID and application key/token
FASTLY_SERVICE_ID="ID"
FASTLY_KEY="token"

Configure Fastly on Platform.sh

If you use Platform.sh, it is recommended to configure all environment variables through Platform.sh variables. In Ibexa DXP, Varnish is enabled by default. To use Fastly, first you must disable Varnish

Get Fastly service ID and API token

To get the service ID, log in to http://fastly.com. In the upper menu, click the CONFIGURE tab. The service ID is displayed next to the name of your service on any page.

For instructions on how to generate a Fastly API token, see the Fastly guide. The API token needs the purge_all an purge_select scopes.

Configuration examples

See below the most common configuration examples for the system, using environment variables.

Example for Varnish with the .env file:

1
2
3
TRUSTED_PROXIES="127.0.0.1"
HTTPCACHE_PURGE_TYPE="varnish"
HTTPCACHE_PURGE_SERVER="http://varnish:80"

Example for Apache with mod_env:

1
2
3
SetEnv TRUSTED_PROXIES "127.0.0.1"
SetEnv HTTPCACHE_PURGE_TYPE varnish
SetEnv HTTPCACHE_PURGE_SERVER "http://varnish:80"

Example for Nginx:

1
2
3
fastcgi_param TRUSTED_PROXIES "127.0.0.1";
fastcgi_param HTTPCACHE_PURGE_TYPE varnish;
fastcgi_param HTTPCACHE_PURGE_SERVER "http://varnish:80";

Example for Platform.sh:

You can configure environment variables through Platform.sh variables.

Tip

For HTTP cache, you will most likely only use this for configuring Fastly for production and optionally staging, allowing variables:env: in .platform.app.yaml to, for example, specify Varnish or Symfony proxy as default for dev environment.

Apache with Varnish

1
2
3
4
5
6
7
8
9
# mysite_com.conf

# Configure Varnish
SetEnv HTTPCACHE_PURGE_TYPE varnish
SetEnv HTTPCACHE_PURGE_SERVER "http://varnish:80"

# Configure IP of your Varnish server to be trusted proxy
# !! Replace IP with the real one used by Varnish
SetEnv TRUSTED_PROXIES "193.22.44.22"

Nginx with Fastly

1
2
3
4
5
6
7
8
9
# mysite_com.conf

# Configure Fastly
fastcgi_param HTTPCACHE_PURGE_TYPE fastly;
fastcgi_param HTTPCACHE_PURGE_SERVER "https://api.fastly.com";

# See above for obtaining service ID and application key/token
fastcgi_param FASTLY_SERVICE_ID "ID"
fastcgi_param FASTLY_KEY "token"

Stale cache

Stale cache, or grace mode in Varnish, occurs when:

  • Cache is served some time after the TTL expired.
  • When the back-end server does not respond.

This has several benefits for high traffic installations to reduce load to the back end. Instead of creating several concurrent requests for the same page to the back end, the following happens when a page has been soft purged:

  • Next request hitting the cache triggers an asynchronous lookup to the back end.
  • If cache is still within grace period, first and subsequent requests for the content are served from cache, and do not wait for the asynchronous lookup to finish.
  • The back-end lookup finishes and refreshes the cache so any subsequent requests get a fresh cache.

By default, Ibexa DXP always soft purges content on reverse proxies that support it (Varnish and Fastly), with the following logic in the out-of-the-box VCL:

  • Cache is within grace period.
  • Either the server is not responding, or the request comes without a session cookie (anonymous user).

Serving grace is not always allowed by default because:

  • It is a safe default. Even if just for anonymous users, stale cache can easily be confusing during acceptance testing.
  • It means REST API, which is used by the Back Office, would serve stale data, breaking the UI.

Customizing stale cache handling

If you want to use grace handling for logged-in users as well, you can adapt the provided VCL to add a condition for opting out if the request has a cookie and the path contains REST API prefix to make sure the Back Office is not negatively affected.

If you want to disable grace mode, you can adapt the VCL to do hard instead of soft purges, or set grace/stale time to 0s.